小说阅读网站,完美世界有声小说全集,女人书籍排行榜

技術文章您現在的位置：首頁 > 技術文章 > 愛澤工業2018年12月部分到貨——ABB氧化鋯分析儀篇

愛澤工業2018年12月部分到貨——ABB氧化鋯分析儀篇

更新時間：2018-12-22 點擊次數：1772次

愛澤工業2018年12月部分到貨產品專題及庫存

——ABB氧化鋯分析儀篇

如下為我司愛澤工業IZE_Industries本月部分到ABB氧化鋯分析儀相關產品，來電索取樣本資料和產品信息。

ABB氧化鋯探頭AZ25-11251愛澤工業izeindustries

ABB氧化鋯分析儀AZ25描述

AZ25燃燒氧氣分析儀是ABB提供的一系列高品質燃燒氣體分析儀中的新產品。AZ25設計用于測量高溫爐氣氛中的氧濃度。

基于氧化鋯電池的傳感器安裝在探頭的處，該探頭直接插入爐中。由此產生的直接原位測量可提供準確，快速的氧氣讀數，用于燃燒控制/優化和過程質量控制目的。

原位技術在過程中提供真正的氧氣測量。消除了在測量前提取和冷卻氣體樣品的系統常見的“平衡偏移”。

需要參考空氣（500至1000毫升/分鐘[1至2立方英尺/小時]）才能實現操作，并且可以從ABB主電源泵單元或流量調節器單元供應。

應用

·爐內氣氛監測

·退火爐

·金屬燒結

·鐵氧體燒結

·燃燒測量和控制：

-浸泡坑

-工藝加熱器

-流化床鍋爐

-高溫焚燒爐

·煙氣溫度超過600°C（1112°F）的所有其他燃燒過程

探頭長度可達1250 mm（49 in.）

多種探頭插入長度允許在爐子或煙道內進行的傳感器定位，以確保準確和有代表性的氧氣測量。

全系列安裝法蘭，在需要全廠標準法蘭或更換現有探頭時提供簡單安裝。

遠程發射器可以安裝在離探頭100米（328英尺）的位置。探頭位置通常是高溫，惡劣和難以接近的區域，長電纜長度的靈活性允許遠程發射器的適當選址

護套材料選擇

為確保材料與工藝條件的兼容性，可選擇三種護套材料：

·鋁質瓷器

-入門級護套材料適用于溫度高達1250°C（2282°F）的應用。

-對腐蝕性化學品和機械和熱應力的有限抵抗力。

·重結晶氧化鋁

-適用于溫度高達1400°C（2552°F）的應用。

-耐腐蝕性化學品和嚴重的機械和熱應力。

·Incoloy 800

-適用于水平安裝時溫度高達850°C（1562°F），垂直安裝時溫度高達1000°C（1832°F）的應用。

-對腐蝕性化學品的耐受性有限，但耐機械和熱應力。

Introduction

The Endura AZ25 combustion oxygen analyzer is the latest in a long line of high-quality, combustion gas analyzers from ABB. The AZ25 is designed to measure oxygen concentration in high temperature furnace atmospheres.

The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted directly into the furnace. The resulting direct, in-situ measurement provides an accurate and rapid oxygen reading, for combustion control /optimization and process quality control purposes.

The in-situ technique provides a true oxygen measurement inside the process. It eliminates ‘equilibrium shift’ that is common to systems in which gas samples are extracted and cooled before measurement.

Reference air (500 to 1000 ml/min [1 to 2 ft3 /hr]) is required for accurate operation and can be supplied from an ABB mains-powered pump unit or a flow regulator unit.

Applications

· Furnace atmosphere monitoring

· Annealing furnace

· Sintering of metals

· Ferrite sintering

· White heart malleablizing

· Combustion measurement and control in:

– Soaking pits

– Process heaters

– Fluidized bed boilers

– High temperature incinerators

· All other combustion processes where the flue gas temperature is in excess of 600 °C (1112 °F)

Probe lengths up to 1250 mm (49 in.)

A wide range of probe insertion lengths allows for optimum sensor positioning within the furnace or flue duct to ensure accurate and representative oxygen measurement.

A comprehensive range of mounting flanges, provide simple installation when plant-wide standard flanges are required or when replacing existing probes.

The remote transmitter can be mounted up to 100 m (328 ft.) from the probe. Probe locations are often high temperature, hostile and inaccessible areas, the flexibility of long cable lengths permits appropriate siting of the remote transmitter

Sheath material options

To ensure material compatibility with the process conditions there is a choice of three sheath materials:

· Aluminous porcelain

– Entry level sheath material suitable for applications with temperatures up to 1250 °C (2282 °F).

– Limited resistance to corrosive chemicals and mechanical and thermal stress.

· Recrystallized alumina

– Suitable for applications with temperatures up to 1400 °C (2552 °F).

– Resistant to corrosive chemicals and severe mechanical and thermal stress.

· Incoloy 800

– Suitable for applications with temperatures up to 850 °C (1562 °F) when mounted horizontally and up to 1000 °C (1832 °F) when mounted vertically.

– Limited resistance to corrosive chemicals but resistant to mechanical and thermal stress.

愛澤工業(IZE INDUSTRIES)*經銷、常用ABB 氧化鋯分析儀型號：

ABB 氧化鋯分析儀AZ25.1.1.2.1.1.5.1.1.1.1.0.0.0.0

ABB 氧化鋯分析儀AZ25.1.1.2.1.1.5.1.1.1.1.0.0.0.0.E./STD

ABB氧化鋯分析儀AZ20.112112221112100CSTD愛澤工業izeindustries

ABB氧化鋯分析儀AZ20描述

AZ20是ABB提供的一系列高品質燃燒氣體分析儀中的新產品。

基于氧化鋯電池的傳感器安裝在插入煙道中的探頭。由此產生的直接原位測量可為燃燒控制優化和排放監測提供準確，快速的氧氣讀數

探頭長度可達4.0米（13.1英尺）

多種探頭插入長度從0.5到4.0米（1.7到13.1英尺），可以安裝到佳測量點，以便在管道內進行的氧氣測量; 即使在大的煙氣管道和煙囪中也是如此。

全系列安裝法蘭可在需要全廠標準法蘭或更換現有探頭時提供簡單的安裝。

變送器可以探測或遠程安裝在遠100米（328英尺）的距離，從而為所有應用提供多種系統選項。安裝在探頭上的變送器選件可提供低的安裝成本。然而，當操作上理想的探頭位置不能為用戶提供便利的訪問時，遠程安裝的發射器提供了靈活性。

先進的設計

AZ20按照嚴格的標準設計和制造，即使在艱巨的應用中也可確保長時間*運行。

操作過程溫度高達800°C（1472°F），可將系統適用性擴展到以前不可能的應用中，并在過程中實現的探頭定位。

模塊化設計減少了元件數量，提高了系統的穩健性和可靠性，簡化了日常維護和維護。完整的可追溯性確保只有高質量的材料才能用于分析儀的構造和嚴格的制造，檢查和測試程序（符合標準ISO 9001），從而使監控器具有的質量和延長的探頭壽命。

Introduction

The Endura AZ20 is the latest in a long line of high-quality, combustion gas analyzers from ABB.

The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring.

Probe Lengths up to 4.0 m (13.1 ft.)

A wide range of probe insertion lengths from 0.5 to 4.0 m (1.7 to 13.1 ft.) enable installation to the optimum measuring point for accurate oxygen measurement within the duct; even in the largest flue gas ducts and stacks.

A comprehensive range of mounting flanges provide simple installation when plant-wide standard flanges are required or when replacing existing probes.

The transmitter can be probe- or remote-mounted at distances of up to 100 m (328 ft.), thus providing versatile system options for all applications. The probe-mounted transmitter option provides the lowest cost of installation. However, the remote-mounted transmitter provides flexibility when the operationally ideal probe location does not provide easy access for the user.

Advanced Design

Designed and manufactured to exacting standards, the Endura AZ20 ensures long periods of trouble-free operation in even the most arduous of applications.

The operating process temperature of up to 800 °C (1472 °F) extends system suitability into previously impossible applications and enables optimum probe location within the process.

The modular design, with reduced component count, improves the robustness and reliability of the system and simplifies routine maintenance and servicing. Complete traceability ensures only the highest quality materials are used in the analyzer's construction and rigorous manufacturing, inspection and testing procedures (to international standard ISO 9001) result in a monitor of superior quality with prolonged probe life.

ABB氧化鋯分析儀AZ20系列的備件和配件